 Impeller
packer for valve bags
The impeller packer
consists of a valve bag filling system
and an electronically controlled weighing system.
This impeller packer is used
for bagging powders and granular materials of small particle size into
10 kg up to 50 kg valve bags.Primarily
used in the Building Materials Industry, it packs cement, lime, gypsum,
plaster mixes and other materials with similar handling characteristics.
Outputs up to 600 bags/hour can be obtained from a single machine.
Higher outputs are achieved by installing machines side by side.
The impeller packer has been
designed for both manual and automatic bag placing.
Technical data:
| Weighing
range |
10
to 50 kg |
Power
supply |
3
- 230/400 V, 50 Hz
(other available) |
| Bag
types |
valve
bags |
Power
consumption |
6
KW |
| Bag
materials |
paper
and plastic |
Control
voltage |
24
VDC (other available) |
| Valve
widths |
90
- 150 mm |
Protection |
IP
55 |
| Bag
dimensions |
width:
350 - 600 mm
length: 450 - 900 mm |
Environmetal
temp.
with anti-freeze protect. |
+
5° C to + 40° C
- 10° C to + 40° C |
Ouput
(with valve widths of
> 110 mm) |
up
to 600 bags/h each 25 kg
(depending on material,
bag dimensions/valva width)) |
Aspiration
supply
- suction
- suction volume |
0
0,01 bar
20 m3/min. |
| Air
supply |
clean,
oil-free compression air |
Noise
level |
<
75 dB (A) |
| Operating
pressure |
6
bar |
Weight |
530
kg; controller 70 kg |
Air
consumption
at 6 bar |
V
= 40 NI/cycle |
|
|
Back
to survey 'jet-loader types / loaders'
|