MULTISTREAM-B80 Solids Flow Meter

Application:
MULTISTREAM-B Solids Flow Meters are designed as enclosed in-line measuring systems for continuous acquisition of flow rates and totalized amounts. With flow rates up to 100 t/h or max. 80 m³/h, these measuring systems can be used for
- flow rate and consumption measurement
- totalization and
- batching
of pulverized to granular materials with a grain size of up to 30 mm.

Equipped with a controllable prefeeder, MULTISTREAM-B is also vavilable for use as a feed system, upon request. Its inlet/outlet arrangement without offset makes the measuring system specially suitable for economical integration into existing production plants.

Construction:
The standard equipment of MULTISTREM-B Solids Flow Meters comprises:
- stainless steel housing
- impact plate
- load cell, and
- integrated electronic box

Designed as a complete module for loca operation, the weighing electronics can be easily accomodated in the box which is integrated in the measuring system. Of course, it is also possible to install the weighing electronics outside of the measuring system. e.g. in the control cabinet.

Functions:
Measuring systems operating according to the impact plate principle acquire the flow rate by means of a reactive force.

Guided by the inlet pipe, the material stream hits the impact plate mounted at a defined angle of inclination. The load cell and the weighing electronics acquire the horizontal component of the reactive force.
Material buil-ups do not affect the emasuring result. Reproducible conditions of material feed, e.g. height
and speed of fall or angle of impact, provide for highest accuracies.

If higher accuracies are required, check measurements are necessary which allow the measuring system to be calibrated without interrupting material flow. Requiring a presilo to be weighed, this additional equipment is available upon request.

DIMENSIONS:

Silo safety devices / level measurement
measuring/weighing