 Secondary
Air Supply Nozzle
For optimizing the
conveyability of bulk goods in
high pressure and low pressure conveying systemsAreas
of application
The secondary air supply nozzle is employed for the optimization of
conveying air in high pressure and low pressure conveyance systems.
Because of the design and the variability of the secondary air supply
nozzle it can be installed immediately after the pneumatic sender or at
the beginning of the conveying pipeline. The insert nozzle can be bored
variably according to each case of application and the dust/air mixture
can be adapted to the most varied conveyance conditions.
Stainless steel models extend the areas of application for the secondary
air supply nozzle.
Function mode
The secondary air supply nozzle makes the addition of carrier air in the
conveyance pipeline possible.
Through variation of the nozzle bore the supplemental air is optimally
guided into the conveyed material. Contingent on the tangential
arrangement of the air inlet, the introduction of additional air is
turbulence-free.
Material/design
Housing: Grey iron or stainless steel casting
Nozzle: Grey iron or stainless steel casting, steel
Painting: hammertone silver grey
Advantages
- Versatile in application
- Compact construction
- Wear resistant
- Air inlet practically turbulence free
Dimensioned drawing
Dimensional table
DN
1
PN 10 |
A |
B |
C |
L1 |
S1 |
d1 |
d2 |
DN
3
PN 10 |
S
2 |
weight
in kg |
| 50 |
65 |
115 |
30 |
200 |
18 |
4
x M 16 |
4
x Ø 18 |
25 |
16 |
18 |
| 65 |
85 |
125 |
42,5 |
250 |
18 |
4
x M 16 |
4
x Ø 18 |
50 |
18 |
24 |
| 80 |
85 |
130 |
42,5 |
300 |
22 |
8
x M 16 |
8
x Ø 18 |
50 |
18 |
28 |
| 100 |
75 |
150 |
55 |
300 |
22 |
8
x Ø 18 |
8
x Ø 18 |
50 |
18 |
33 |
| 125 |
75 |
170 |
68 |
300 |
22 |
8
x M 16 |
8
x Ø 18 |
50 |
18 |
40 |
| 150 |
100 |
190 |
75 |
300 |
22 |
8
x Ø 23 |
8
x Ø 23 |
65 |
18 |
55 |
DN 2 dimension according to bulk goods and throughput
performance
Back
to Survey 'Conyeor Belts / Pneumatic Conveying'
|
